Application of Membrane Filtration in Agricultural and Sideline Products
Products such as liquor, vinegar, and soy sauce are produced through the fermentation of starchy raw materials. Filtration is a critical step in their production, and its effectiveness directly impacts product quality. Traditional filtration methods—including natural sedimentation, activated adsorption, diatomaceous earth filtration, and plate-and-frame filtration—suffer from various drawbacks regarding processing time, operational complexity, and environmental impact; consequently, adopting a more advanced filtration method has become essential.
Hollow-fiber membranes can retain macromolecules and fine particles ranging from 0.002 to 0.1 μm while allowing small molecules and dissolved solids (such as inorganic salts) to pass through. This process preserves the original color, aroma, and flavor of the liquid while achieving sterilization without the use of heat. Therefore, the use of advanced hollow-fiber filtration systems for processing liquor, vinegar, and soy sauce represents a superior filtration approach.
Polyethersulfone (PES) is selected as the membrane material. Hollow-fiber ultrafiltration membranes made from this material exhibit excellent chemical resistance—withstanding organic solvents such as chlorinated hydrocarbons, ketones, and acids, as well as remaining stable in the presence of acids, alkalis, aliphatic hydrocarbons, oils, and alcohols. They also possess good thermal stability and resistance to steam and superheated water (150–160°C), offer high flux rates, and demonstrate high mechanical strength.
Filtration Method
Since products such as liquor, vinegar, and soy sauce are mixtures of water and various organic substances—including amino acids, organic acids, sugars, vitamins, alcohols, and esters—cross-flow filtration is employed. A pump delivers the liquid to be filtered through piping to the filtration membrane; the permeate (liquid passing through the membrane) becomes the finished product, while the retentate (liquid not passing through) can be returned to the source via a concentrate line. The discharge of the concentrate generates significant shear force on the membrane surface, effectively reducing membrane fouling. The ratio of concentrate flow to permeate flow can be adjusted based on the specific characteristics of the liquid being filtered to further mitigate fouling; the concentrate can be returned to the source and re-introduced into the ultrafiltration system for processing.
Cleaning System
The cleaning system is a crucial component of the hollow-fiber filtration unit. Since the membrane surface can become coated with various retained impurities—and even fine particles can clog the membrane pores, thereby impairing separation performance—timely membrane flushing is essential. The cleaning principle involves using a cleaning pump to feed cleaning fluid (typically filtered clean water) in reverse through the piping into the hollow-fiber membranes, washing away impurities from the membrane walls; the resulting waste liquid is then discharged via the waste outlet. The system supports two cleaning modes: forward flushing and backwashing. Forward flushing (isobaric flushing) is performed by closing the filtrate outlet valve, fully opening the concentrate outlet valve, and starting the production pump to feed liquid into the membrane module. This equalizes the pressure on both the inner and outer sides of the hollow fibers; the resulting pressure dynamics loosen fouling adhering to the membrane surface, and the subsequent high-flow flush removes large amounts of loose impurities. Backwashing (reverse flushing) is performed by closing the filtrate outlet valve, fully opening the waste outlet valve, opening the cleaning valve, and starting the cleaning pump to feed cleaning fluid into the membrane module, thereby removing impurities from within the membrane pores. Careful control of flushing pressure is required during backwashing; the pressure must remain below 0.2 MPa. Excessive pressure risks rupturing the membrane or compromising the bond between the hollow fibers and the potting material, leading to leaks.


Leave a Reply
Want to join the discussion?Feel free to contribute!